1. Add water into the plastic bottle
① No essential oil or other viscous liquid can be added inside the
② Please do not use the water over 40℃ or it will become deformed
③ Please put the humidifier at even place.
④ The water inside the bottle should be enough to cover the cotton
2. Plug in the cotton bar until the cotton bar reaches up to the
① Clean the screw cap and the plastic bottle every time before the
② Do not use the water that keeps for a long time.
3. Connect the USB cable with the computer and press the LED
① Please do not assemble or damage the USB cable. And behaviors
like twisting the USB cable by force, pressing it will cause harm
like electric shock, short power or fire.
② Please make sure the spray nozzle does not absorb any mist.
③ Please keep it at least 70cm away from the computer when
connecting the humidifier with your computer.
Way to change the Screw cap
1). Open the humidifier bottom
Turn right to take off the screw cap
2). Change the screw cap
Take out the screw cap inside the humidifier and put the new screw
3). Close the cap
Turn left to close the cap
Please use the bottle with its thread compatible with the screw
The USB cable cannot be plugged in
USB plug is not tight
Plug in the USB cable again
No mist comes out or small mist
No enough water inside or the absorbent cotton bar is not soaked.
Please check the water volume and the humidity of the cotton bar.
The water keeps in the bottle for too long time.
Pour out the water and add some new water
Stop working suddenly
The humidifier will stop working automatically after 2hours
Press the control button and restart the humidifier
LED Light off
The humidifier is on the light-off mode.
Press the control button twice and restart the light-on mode.
The spray nozzle or the cotton bar is dirty
Clean the nozzle or the cotton bar